Black & Decker RD1440K, A great drill/driver with a..
| Overall Rating | ![]() ![]() ![]() ![]() ![]() |
|
A great drill/driver with a Classic look from the 40’s-50’s
I just bought this drill over the weekend. The classic styling of a drill from the 1940’s-1950’s is what sold me at first–it’s a drill just too good looking to pass up. However, more importantly it is a great tool, with some very 21st century features: an automatic electronic level that tells you when you’re holding the drill straight in any of three different orientations, and a battery status LED meter.There is a wide range of torque settings, so it really does work well as a driver, all the way down to small screws. I used it tonight to assemble a portable laptop table without either stripping or overdrilling the self-tapping wood screws like I have often done in the past. And, drilling power is good for a 14.4V drill. The charger is a nice small 3-hour charging unit that fits over the top of the battery–not one of those clunker fast chargers that come with most cordless units. And, the set comes with a padded carry case and even a polishing cloth (you’ll want to keep that aluminum housing shiny!). The only negative I’ve found is that the forward/reverse switch above the trigger is not quite big enough for my fingers, and it could use a more positive feel when switching positions.I have a DeWalt 18V hammerdrill/driver that is an absolute beast when it comes to cordless power, but a bit hard to use for more delicate screwdriving jobs, and a corded Milwaukee Hole-Shooter drill that is almost too much to handle at times. This B&D 14.4V rounds out my drill/driver set nicely.Lastly, although you will pay a bit more for the classic styling–if you’re like me, once you see this drill close up you just have to get one. I plan to buy two more as Christmas gifts for my Dad and brother this year.
Update (2/9/2012): I also found some auctions for this item here.
The featured review for this product, Black & Decker RD1440K 85th Anniversary 14.4V Cordless Drill/Driver Kit Tools & Hardware, was written by .
The average rating for this item is out of 5 stars, according to 3 reviews.
- Related posts on drill
- ForSale SHOP FOX W1680 1-Horsepower 17-Inch Floor Model Drill …
- ForSale Industrial 1-1/2 Hammer Drill / Demo Hammer – 3 000 BPM …
- Related posts on tool
- GS-911 Diagnostic Tool | jellofart's blog
- Recboot tool to exit recovery mode enter recovery mode 100& …
- Body Candy Body Jewelry® Italian Charms Tool | Best Buy Cheapest Price
Related posts:



Reviews (2)
Ira B. Baker ll
May 3rd, 2010 at 6:59 am
Not the legend I expected
The Black & Decker drill does not live up to its legend. I found out after purchasing this drill it was nearly impossible to get a good grip on the very small drill chuck in order to properly tighten the chuck on a bit. While drilling white oak the bit kept spinning in the chuck. I had to used channel locks to hold the small back ring because I found it hard to grip it with such a large diameter clutch housing behind it. I was not happy with the one battery (NI-cad), which left me going back to the garage for another drill to finish the job, it ran out of juice pretty fast. A drill that looks nice (wall Hangar)however, but not the drill to take to the job site. Took it back to the store and found that the price had been reduced … I think I know why! …
Anonymous
May 9th, 2010 at 6:13 am
A great drill/driver with a Classic look from the 40’s-50’s
Rated 5 stars.
Leave a reply